Abrasive Blasting & Painting
Services

Processing

Abrasive Blasting & Painting

A 55 × 60 m blasting and painting workshop with full coating documentation, the last step our stainless steel fabricator and structural teams hand over before dispatch.

Before blasting or painting we test the compressed air with a blotter test, to ensure the compressor, receiver and hoses are free from condensed water and oil. Surface preparation is the single biggest factor in coating performance, so surfaces are dry and free from burrs, weld spatter, flux, rust, loose scale, dirt, dust, grease and oil before any paint is applied.

After preparation, primer is applied before corrosion or recontamination occurs, generally within four hours after blasting. Blasting is carried out by dry blast cleaning wherever possible, to grades specified in the painting schedule, achieving close to white metal to SSPC-SP10 (SA 2½).

Our process provides internal and external coating for pipework, piping and structural steel, following SSPC quality requirements, joint surface preparation standards, dry paint measurement, coating selection and application requirements, and approved data sheets.

Coating systems are selected against the service environment, whether that is a coastal process plant, an offshore module, a mine site in the Pilbara or an inland chemical facility, and each coat is applied within the recoat window nominated by the paint manufacturer. Ambient temperature, humidity and steel temperature are recorded at the time of application.

Wet film and dry film thickness are measured coat by coat, holidays and thin spots are repaired, and stripe coats are applied to welds, edges and cut outs where a spray gun cannot reach evenly. Where the paint system requires it, the finished item is holiday tested before dispatch.

Every package leaves with a coating report listing the system, batch numbers, application conditions, thickness readings and any repairs, which is what a client needs when a warranty question comes up years later on a site inspection.

Included in this service

  • Blotter test of compressed air before coating
  • Dry blast cleaning to specification
  • Internal and external coating
  • Coating data sheets and documentation
  • Stripe coats to welds and edges
  • DFT measurement and holiday testing

FAQs

Blasting achieves close to white metal to SSPC-SP10 (SA 2½), as specified in the client’s painting schedule.

Yes, our painting process provides inner and outer coating for pipelines, piping and structural steel.

Yes. Abrasive Blasting & Painting is delivered from our Rayong workshop for steel fabrication Australia projects, with detailing, fabrication, coating, inspection and shipping documentation handled in house. We ship FOB or CIF through Laem Chabang, Map Ta Phut or Sattahip.

As a stainless steel fabricator we hold ISO 9001:2015 quality management and segregated workshops, so Abrasive Blasting & Painting is produced without cross contamination. Every item is inspected against the specification before dispatch.

Abrasive Blasting & Painting is fabricated to the client code, ASME, AS/NZS, BS, EN or ASTM, with welding procedures and welders qualified to suit. Our documented quality system applies to every package we manufacture.

Send drawings or a scope list and our estimating team answers your enquiry within 48 hours, confirming the pricing programme. The priced quotation then follows once scope and standards are agreed. Abrasive Blasting & Painting is scheduled against your site dates, with progress reporting through a dedicated project manager.

Yes. Structural steel fabricator capability in the same workshops means frames, supports, walkways and access platforms can be supplied with Abrasive Blasting & Painting as one coordinated package, fabricated and trial assembled together.

It often is. Pressure vessels in Australia, steel tanks and Abrasive Blasting & Painting can be engineered as one scope, sharing design review, procurement, coating and shipping. That reduces interfaces and consolidates documentation.

Stainless steel pipe welding is available alongside Abrasive Blasting & Painting, with ASME IX qualified procedures for SS304L, SS316L, Duplex and Super Duplex. NDT can be included in the inspection and test plan.

Pipe spooling Australia shipments are packed, numbered and sea fastened to match site erection sequence, and Abrasive Blasting & Painting can travel in the same consolidated shipment. We provide packing lists, weights and lifting points for each item.

Next capability

Pig Launchers & Receivers

Request for quotation

Send us your drawings.

Every enquiry is answered within 48 hours by our estimating team in Rayong. The priced quotation follows once drawings, quantities and standards are confirmed. Stainless steel fabrication, structural steel fabrication, pipe spooling, pressure vessels, steel tanks, mining equipment and conveyors, pig launchers, chutes and hoppers, send the package and we will price it.