16” Pig Launcher GWF-1, Pig launcher fabrication by K999 Engineering & Construction
Projects

Processing

16” Pig Launcher GWF-1

Baker Hughes · Australia · January 2015

A 16-inch pipeline pig launcher fabricated for Baker Hughes, complete with quick opening closure, barrel and support frame.

Pig launchers are pressure equipment married to pipeline geometry. For Baker Hughes, K999 fabricated a 16-inch pig launcher for the GWF-1 pipeline at the Rayong workshop: barrel, reducer, quick opening closure mounting, vent and drain connections, and the structural support frame.

The launcher was built to the client’s piping drawings with weld procedures qualified for the line’s design pressure, examined by NDT and hydrostatically tested before painting. Barrel alignment to the pipeline flange was checked dimensionally so the unit mated with the field spool without site adjustment.

Scope highlights

  • 16-inch pig launcher barrel, reducer and closure fabrication
  • Pressure boundary welds examined by NDT and hydro tested
  • Dimensional check of pipeline flange alignment
  • Support frame, vent, drain and instrumentation connections

FAQs

Barrel and reducer, quick opening closure preparation, branches for vent, drain and instruments, support frame, NDT, hydrostatic testing and coating.

Yes. The completed pressure boundary is hydrostatically tested to the specified test pressure, with records issued alongside the NDT reports.

Yes. We fabricate to the client’s piping drawings and verify flange alignment dimensionally so field make up needs no correction.

The contract covered pig launcher fabrication for Baker Hughes in Australia, at a value of US$85,000. Work was released against approved shop drawings, with every assembly detailed, welded, coated and packed so the client's site team received a package they could erect rather than a pile of loose steel.

Fabrication took place at the K999 steel fabrication workshop in Rayong, Thailand, which sits on the eastern seaboard next to the Laem Chabang and Maptaphut industrial estates. The completed package for Australia was blasted, coated, match marked and bundled in erection order, then shipped with packing lists, material certificates and inspection records so site receiving could be closed out without digging through crates.

Welding followed qualified procedures under ASME Section IX, with pressure retaining and process welds examined by radiography, ultrasonic or dye penetrant testing as specified. Where the client's specification named a particular code, weld procedure, coating system or inspection authority, the job was run to that document and the records were compiled per assembly for handover.

Quality control ran from goods in to packing: mill certificates recorded against heat numbers, weld procedures and welder qualifications verified before production, dimensional checks at each assembly stage, NDT on nominated welds, coating thickness and surface preparation records, and a final match mark and packing list. That documentation is what lets a client in Australia accept the package without reinspection on arrival.

Process plant work is driven by piping and plate geometry, access for maintenance and the need for spools and vessels to arrive tagged to the isometrics rather than as loose steel. On top of that, the January 2015 delivery window meant production had to be planned around material lead times and shipping schedules, with inspection released progressively instead of at the end so the package kept moving toward Australia.

Yes. Processing fabrication is core workload rather than an occasional job, and our processing record includes packages for clients such as Baker Hughes. Send drawings, specifications and the required delivery date and our estimating team in Rayong will answer your enquiry within 48 hours, then follow with a fabrication and supply quotation once the package is clear.

Typical fabrication and supply packages run six to twelve weeks from approved drawings to shipment, depending on tonnage, material availability, coating requirements and inspection level. The programme is fixed at award against your delivery date, with progress reporting and inspection releases issued as the work proceeds so you can plan shipping and site erection.

Next project

Kings Valley Project

Request for quotation

Your project could be next.

Every enquiry is answered within 48 hours by our estimating team in Rayong. The priced quotation follows once drawings, quantities and standards are confirmed. Stainless steel fabrication, structural steel fabrication, pipe spooling, pressure vessels, steel tanks, mining equipment and conveyors, pig launchers, chutes and hoppers, send the package and we will price it.