Industries / 06
Chemical
Chemical plants punish the wrong material choice and reward disciplined welding. K999 fabricates storage tanks, reactors, heat exchangers, pipework and structural supports in carbon steel, stainless, Duplex, Super Duplex, nickel alloys and titanium, with welding procedures qualified for the specific service and post weld treatments recorded.

Alloys and aggressive service
Vessels, tanks and alloy pipework for acids, solvents, caustic and high purity chemical duty, where the wrong filler metal is a corrosion failure waiting to happen.
Material selection drives everything downstream: filler metal, interpass temperature, purge gas, cleaning between passes, and whether the weld needs solution annealing. For Duplex and Super Duplex we control heat input and ferrite content, for titanium we weld under full argon purge with trailing shields, and for stainless we finish with pickling and passivation so the passive layer is restored rather than assumed.
Tanks and vessels are built to API 650, ASME or client specifications with nozzle reinforcement, manways, heating coils, agitator mounts and level instrumentation. Pipework is fabricated from isometrics with alloy identity checked at every stage, and spools are labelled with the heat number so site traceability continues after delivery.
Corrosion protection is specified rather than guessed: rubber lining, glass flake, phenolic epoxy or thermoplastic lining for aggressive internal duty, with surface preparation records and holiday testing. Non destructive testing is performed to the joint efficiency and service class the code requires, and we can host the client's inspector in Rayong for the full build.
What we fabricate
- Chemical storage tanks to API 650 and client specifications
- Reactors, columns and heat exchanger shells
- Duplex, Super Duplex, nickel alloy and titanium welding
- Lined vessels and rubber or glass flake internal protection
- Alloy pipe spooling from isometrics
- Pickling, passivation and ferrite testing
Typical applications
- 01Acid, caustic and solvent storage and transfer
- 02Fertiliser and agrochemical production plants
- 03Specialty and fine chemical reactors
- 04Solvent recovery and distillation packages
- 05Effluent treatment and neutralisation systems
- 06Chlor alkali and sodium hypochlorite plants
chemical tank fabrication Thailand / Duplex and Super Duplex fabrication / titanium welding Thailand / rubber lined vessel fabrication / API 650 tank fabrication Thailand / alloy pipe spooling chemical plant / pickling and passivation Rayong / chemical process equipment fabrication
Chemical FAQs
Questions we are asked
Ten detailed answers on chemical fabrication, testing, delivery and documentation.
Carbon steel, stainless steels including 321 and 347, Duplex and Super Duplex, nickel alloys such as Alloy 625 and C276, and titanium. Each material is welded to a procedure qualified for that alloy and thickness, with the cleaning and interpass controls the alloy requires.
We limit heat input, control interpass temperature, use the specified filler and check ferrite content on completion. Where the specification requires it, welds are also tested for corrosion resistance, and root purge quality is verified before the second pass goes in.
Yes. We fabricate shop built tanks to API 650 and client specifications, with shell courses rolled and fitted, nozzles reinforced, manways, heating coils and instrumentation connections included, and testing performed to the standard required for the stored product.
We prepare surfaces for rubber lining, glass flake, phenolic epoxy and thermoplastic lining systems, coordinating with specialist lining contractors and inspecting surface preparation before application. Holiday testing and thickness checks are recorded on completion.
Titanium is welded in a dedicated area under full argon purge with trailing shields, using qualified procedures and careful cleaning to prevent contamination. Colour inspection of the weld and heat affected zone confirms the shielding was effective before the part is accepted.
Systems are matched to the atmosphere and spill risk, typically zinc rich primer with high build epoxy and a polyurethane finish, or a chemically resistant scheme for splash zones. Dry film thickness is recorded coat by coat and repairs are documented.
Yes. Where drawings are lost, we can measure and identify the material of an existing item, produce a drawing for approval, then fabricate the replacement in the correct alloy so it matches the original fit and duty.
Yes. We pickle and passivate stainless fabrications to restore the passive layer after welding, then rinse and verify. Records cover the product used, contact time and the areas treated, which matters for audits and for corrosion assurance.
Alloy material is received with certificates, identified by heat number, stored separately from carbon steel, and checked with alloy analysis before cutting and again before welding. Dedicated tools and consumables are used for stainless and nickel alloys.
Yes. We fabricate replacement pipework, vessels, tanks and liners for turnaround windows, with the schedule agreed against the outage plan. Small priority items can move through the shop quickly, and we can provide site support for fit up during the window.
Request for quotation
Talk to us about your chemical package.
Send drawings, a scope or a sketch and our estimating team in Rayong will answer your enquiry within 48 hours, with a fabrication approach for your chemical project. The priced quotation follows once the scope is confirmed.

