Industries / 09

Pharmaceuticals

Pharmaceutical fabrication is judged on evidence. K999 builds stainless process tanks, skids, WFI and clean utility pipework, dust extraction and cleanroom structures to GMP expectations, with the weld logs, surface finish reports, passivation records and material traceability needed to support qualification and validation.

Pharmaceuticals fabrication by K999 Thailand

Validated, documented, clean

Stainless process equipment, hygienic pipework and cleanroom steelwork fabricated for validation, with the surface finish and documentation regulators expect.

Clean utility pipework, whether purified water, WFI or clean steam, is a weld quality and drainage problem. We fabricate with orbital welding where the diameter allows, control purge on every joint, slope lines correctly, eliminate dead legs, and record each weld with its welder, machine, parameters and inspection result so the loop can be documented as built rather than assumed.

Vessels and skids are built in 316L with hygienic finishes, mechanical polish or electropolish applied to the roughness the specification requires, then passivated and verified. Agitators, spray balls, instrument ports, sampling valves and jacket connections are positioned to suit cleaning validation, and the assembly is leak tested and prepared for transport with sealed connections.

Documentation is the deliverable as much as the equipment: mill certificates with heat numbers, weld maps and logs, roughness measurements, passivation and cleanliness records, pressure and leak test certificates, and as built drawings. We work with client quality teams on the inspection and test plan before fabrication starts, and can accommodate witnessed testing in Rayong.

What we fabricate

  • 316L process tanks and vessels with hygienic finish
  • Orbital welded PW, WFI and clean steam pipework
  • Dosing, filtration and buffer preparation skids
  • Dust extraction, ducting and containment structures
  • Mechanical polish, electropolish and passivation
  • Validation ready documentation and traceability

Typical applications

  • 01Oral solid dosage and tabletting facilities
  • 02Sterile filling and aseptic processing areas
  • 03Purified water and WFI distribution loops
  • 04Buffer and media preparation suites
  • 05Cleanroom partitions, frames and equipment supports
  • 06API and intermediate production plants

pharmaceutical stainless fabrication Thailand / WFI pipework fabrication / GMP skid fabrication / orbital welding pharmaceutical Thailand / electropolish and passivation services / cleanroom steelwork fabrication / hygienic vessel fabrication Rayong / validation documentation fabrication

Pharmaceuticals FAQs

Questions we are asked

Ten detailed answers on pharmaceuticals fabrication, testing, delivery and documentation.

316L process tanks and vessels, orbital welded purified water, WFI and clean steam pipework, buffer and media preparation skids, dosing and filtration skids, dust extraction ducting, cleanroom frames and equipment supports, all with validation ready documentation.

Internal product contact surfaces are mechanically polished to the roughness the specification requires, commonly below 0.8 micrometres with electropolish available for finer finishes. Each area is measured and reported so the finish is verified rather than assumed.

Pipework is orbitally welded where the diameter allows, with purge quality controlled and weld parameters recorded for every joint. Each weld has a unique number tied to the welder, machine, parameters and inspection result in the weld log.

Yes. We fabricate to the drainage and velocity requirements of the system, slope lines, eliminate low points and dead legs, and use the specified surface finish and joint type. Documentation supports the loop qualification that follows installation.

We provide material certificates with heat numbers, weld maps and logs, surface roughness reports, passivation and cleanliness records, pressure and leak test certificates and as built drawings. These are the fabrication records a client quality team needs for installation and operational qualification.

Cleanroom frames, partitions, benches and equipment supports are fabricated to the room layout with services coordinated with the mechanical and electrical packages. Items are built for clean assembly on site with minimal cutting and no site welding where possible.

Stainless fabrications are cleaned after fabrication, pickled or mechanically treated where needed, passivated to restore the passive layer, then rinsed and inspected. Records cover the method, chemicals or equipment used and the areas treated.

Yes. Skids are assembled with pumps, valves, instruments, cable trays, junction boxes and local controls, then leak tested and sealed for transport. Instrument tags follow the client drawings so commissioning is verification rather than discovery.

Stainless work is carried out in a segregated area with dedicated tools, grinding discs and consumables, and carbon steel is kept clear of hygienic fabrication. Finished surfaces are protected with film or capping until packing.

Yes. Client quality teams and their consultants are welcome to attend hold points including material verification, weld inspection, surface finish checks and pressure testing. We agree the inspection and test plan before the first cut is made.

Request for quotation

Talk to us about your pharmaceuticals package.

Send drawings, a scope or a sketch and our estimating team in Rayong will answer your enquiry within 48 hours, with a fabrication approach for your pharmaceuticals project. The priced quotation follows once the scope is confirmed.