Industries / 03
Water Infrastructure
Water projects demand pipe that is round, flanges that meet, and coatings that survive decades in the ground. K999 fabricates large diameter carbon steel and stainless pipework, penstocks, manifolds, valve assemblies and tank steelwork for treatment plants, pump stations and irrigation networks, with hydrostatic testing and coating inspection before dispatch.

Pressure, flow and corrosion
Large diameter pipework, penstocks, manifolds and treatment plant steelwork for municipal, industrial and irrigation water schemes.
Large bore water pipe is a rolling and fit up discipline. We roll shell sections on plate rolls, fit and weld longitudinal and circumferential seams to qualified procedures, then machine or fit flanges so bolt holes line up within tolerance at every joint. Spools are dimensionally recorded against the isometric before coating so installation crews are not chasing accumulated error in a trench.
Coatings are chosen for the environment: fusion bonded epoxy or liquid epoxy for buried potable water lines, polyurethane and high build epoxies for exposed plant pipework, and cement mortar lining where the client specification calls for it. Stainless and Duplex are used for aggressive or chlorinated duties, with pickling and passivation completed in house.
Testing follows the specification, with radiography or ultrasonic testing of butt welds, dye penetrant on branch connections and hydrostatic or pneumatic testing witnessed by the client or their inspector. Every spool leaves the yard with a numbered tag, a spool drawing, coating records and a test certificate.
What we fabricate
- Large diameter carbon and stainless steel pipe fabrication
- Penstocks, manifolds and header assemblies
- Pump station pipework and valve spools
- Fusion bonded epoxy and liquid coating application
- Pickling, passivation and internal lining
- Hydrostatic and pneumatic testing with client witness
Typical applications
- 01Municipal water and wastewater treatment plants
- 02Pump stations and rising mains
- 03Irrigation and raw water transfer pipelines
- 04Desalination plant process pipework
- 05Cooling water and fire water ring mains
- 06Dam outlet works and hydro penstocks
large diameter pipe fabrication Thailand / penstock fabrication / water treatment plant pipework / pipe spooling for water infrastructure / fusion bonded epoxy coating Thailand / stainless water pipe fabrication / pump station pipework fabrication / hydrostatic testing pipe spools
Water Infrastructure FAQs
Questions we are asked
Ten detailed answers on water infrastructure fabrication, testing, delivery and documentation.
Large diameter carbon and stainless steel pipe, penstocks, manifolds, headers, valve spools, pump station pipework, tank steelwork and access platforms for treatment plants, pump stations, irrigation schemes and desalination plants.
We roll and weld large bore pipe in sections that suit transport, commonly up to around three metres diameter, with the exact limit set by plate thickness and shipping route. Larger bores are fabricated in segments for site assembly with match marked joints.
Spools are set out from the isometric on a levelled bed, tacked, checked for square and rotation, and welded with the sequence planned to control movement. Flange faces are checked for square and bolt hole orientation before coating, and the as built dimensions are recorded on the spool drawing.
Fusion bonded epoxy or liquid epoxy is common for buried potable water lines, with polyurethane or high build epoxy for exposed plant pipework and cement mortar lining where the specification requires it. Internal and external systems are selected for the soil, water chemistry and potable contact approval.
Yes. Spools and assemblies are hydrostatically tested to the pressure and duration in the specification, with the test witnessed by the client or their inspector where required. Test pressure, hold time, gauge details and any accepted repairs are recorded on the test certificate.
Yes. We fabricate in 304, 316L, Duplex and Super Duplex depending on chloride level and duty, with purged root welds, pickling and passivation, and ferrite checks on Duplex. Material selection is agreed against the water chemistry before drawings are released.
Manways, handholes and end openings are planned so lining crews can work and inspect inside the pipe or vessel. We coordinate with lining contractors on surface preparation, and protect finished linings with end caps and timber bracing during transport and storage.
Yes, including penstock shells, stiffener rings, guide frames, trash rack structures and embedment steelwork. Items that will be embedded in concrete are fabricated with anchor systems and held to tight dimensional tolerances because the concrete cannot be adjusted afterwards.
A data book with material certificates and heat numbers, spool drawings and as built dimensions, weld maps, non destructive testing reports, coating and lining records, hydrostatic test certificates and packing lists with each spool tagged for site identification.
Yes. We survey the tie in point, record flange standard, facing, bolt pattern and centreline dimensions, then fabricate the spool to suit. For live plant work we can supply a site measurement sheet for the client team to complete, then build to those recorded dimensions.
Request for quotation
Talk to us about your water infrastructure package.
Send drawings, a scope or a sketch and our estimating team in Rayong will answer your enquiry within 48 hours, with a fabrication approach for your water infrastructure project. The priced quotation follows once the scope is confirmed.

